Questions and Answers |
 Interesting article: Quality installation of plastic windowsQuality installation of plastic windowsMost important, not only to select the right window, but also make good erection. The durability of windows by 99% depends on proper installation designs. Therefore, we advise you not to save, and to entrust this responsibility to specialists. What is meant by quality installation? There are certain rules that must not be neglected. • The window is installed strictly on the level vertically and horizontally, ensuring durability and safety operation of hardware. • Provide reliable rigid fixation of the window in the opening with special mortgages fastening elements. • Sites Adjacent to the window block wall gap reliably zagermetizirovany related materials. • There Vapor dense materials inside the premises, does not allow moisture inside the seam is teplozvukoizolyatsionny layer inside the junction of high-quality dense melkoporistoy mounting foam. • Use firm podstavochnogo profile, mandatory use of GOST standards. Podstavochny profile ensures the correct installation of windows, sills and low (attached to the streets to tap rainwater). Installation of windows PVC is better to do during general repairs in the apartment. Otherwise you should pass to release windows, zastelit floor, as well as all the furniture and equipment in a room with paper or foil. In the main phase of installation of PVC windows and the following jobs: • Remove the old frames; • inspection window aperture through vertical and horizontal Weighing level; • Prepare holes for fasteners on the perimeter of the window and wall; • Install window with the help of special items (samorezov, anchor bolt and plates); • sealing the junction between the window and walls with foam; • Install exterior window sills. Before starting the installation of window frame you need to prepare for the installation of aperture. For this to her removed leaf, shtapiki, removed glass-packet. Rama prischelknutym bottom associated with the profile is inserted into the opening to the technological wedge. Then it should align on a horizontal plane and on the sides. After partitioning the frame is removed and its drill holes under the fasteners. Then the frame is inserted into the opening and carefully aligned with the help Weighing. After that, enshrined in the opening wedges and recorded with the help of fasteners. Once again be checked fixing the overall leveling windows and the lack of sagging profile in the field of attachment. You can then proceed to seal the seams. Sealing joints - a very delicate moment in the process of installing windows. Technically simple, this procedure requires the precision of technology and quality installation materials. The main gap between the frame and a wall filled with dense, melkoporistoy mounting foam. It must be reliably protected from exposure to sunlight and from contact with moisture. Therefore, all zapenennye seams should be sealed from the inside and outside the premises. The quality of the installation of windows «hot pursuit» do not always possible, if, of course, during the non-installation is not fractured glass-packet or «forgot» set of fixtures. But more often happens that installed the window looks perfect, but problems arise over time. At least once a year, the window should be «preventive inspection». In addition, it should be noted that the deteriorating climate in the apartment after the installation of modern windows are not always linked to improper installation. Increased humidity, stuffiness and the appearance of condensation on the insulating glass unit may be caused by poor ventilation in the house. In this case it is necessary to solve the problem together - in conjunction with the installation of new windows develop additional sources of ventilation and air conditioning. At the final stage: - Close the joints and (by arrangement) escarp; - Set the window sills; - Regulate the fixture; - Remove profiles with protective film. Now only do wet cleaning of the apartment - and enjoy new plastic windows! |
Contact |
Telephone in Moscow: (multi) | (495) 648-68-68 | ||
Address: | m. Theater, st. Nikolskaya, 15 | ||
receiving calls: Office hours: | 09:00 - 22:00 (always) 10:00 - 18:00 (weekdays) | ICQ-consultation: | |
All rights reserved Copyright © 2001-2007 | CJSC «AngryPlastic» |
AngryPlastic.ru PVC windows. Plastic windows. AngryPlastic.ru