Questions and Answers |
 Interesting article: Recommendations for the Exploitation of the windowRecommendations for the Exploitation of the windowUpon completion of installation works preferably within 10 days to remove the protective tape from the inside and outside of the box. Adhesives protective film exposed to weather and solar radiation, which may result in further embarrassment Remove foil from the window frame. In the plastic window profile and does not require any special care, except in defense of any mechanical effects. To extend the life of the recommended follow the rules of caring for windows. Namely the need to independently carry out maintenance of window designs: • Lubrication of moving parts fitting means, not containing resin. • inspection and cleaning rubber seals. • Cleaning of drainage (drainage) holes from the mud. To increase the lifetime of mosquito nets to withdraw recommend mosquito nets for the winter, if necessary, but at least once a year, mosquito nets rinse with warm soap solution. Cleaning profile One of the advantages of PVC window profiles - is that it is very easy washing. But any media profile can not wash! Do not use abrasive powder and cleaners, because due to their plastic surface could be a «rough» as well as a means of containing acid, acetone, gasoline or solvents, because surface can be damaged, and mud proniknet deep into the frame. In addition, there may be dissolved substances, stabilizing the surface and those that prevent it from penetrating radiation, leading to the emergence of persistent changes in color and damage the surface. When not in use is recommended that you use cleaners made specifically for this proposed manufacturers, as well as funds cultured water that would normally apply in the home for washing dishes. Cleaning glasses To avoid damage the surface of insulating glass unit should never remove pollution from solid glasses or sharp objects. It is necessary to use special tools to clean glasses, do not contain offensive components, solvent or edkuyu Alkali! Such funds can be purchased at any farm store. The inner surface of glazing insulating glass unit is not contaminated, so cleaning is not required. Cleaning rubber seals Standard seals are made of rubber (EPDM), are mostly painted in black. To preserve the elasticity needed 2 times a year to clean rubber seals from dirt, using aqueous solution of conventional cleaning agents used at home or means of containing silicon oil or glycerine . Do not permitted solvent cleaning pads. If, over time pads lost elasticity or choppy, they should be replaced with new ones. When properly Exploitation of this can happen no sooner than 5 years. |
Contact |
Telephone in Moscow: (multi) | (495) 648-68-68 | ||
Address: | m. Theater, st. Nikolskaya, 15 | ||
receiving calls: Office hours: | 09:00 - 22:00 (always) 10:00 - 18:00 (weekdays) | ICQ-consultation: | |
All rights reserved Copyright © 2001-2007 | CJSC «AngryPlastic» |
AngryPlastic.ru PVC windows. Plastic windows. AngryPlastic.ru